Needles and Guns

Tattoo artists have been using tattoo guns and machines for years. It is a safer way to tattoo then with just ink and needle like how they used to do it. Kat Von D's favorite gun is the rotary tattoo machine, mostly because of the type of shading it can create.

I really dont believe that tattooing is quite as safe as it says, only because some people have been known to get a sickness after getting a tattoo, the most common one is a tattoo staff infection. You may get ink poisioning, you can sometimes be allergic to the ink and not know it, or the needle may not be sterile.



These are the types of machines and guns. I got the information from http://en.wikipedia.org/wiki/Tattoo_machine

• Rotary tattoo machine: A rotary tattoo machine, built in 1978 by Manfred Kohrs of Germany. Rotary tattoo machines were the original machines, based on rotary technology, which was invented by Samuel O'Reilly and improved by the tattoo artists through the years. Rotary type machines use an electric motor to drive the needles. Some recent upgrades include using an armature bar to increase efficiency, a characteristic of coil machines. Recently, there have been improvements to make this type of machine pneumatic, in place of the electric motor used now.

• Coil tattoo machine: Coil tattoo machines are the most commonly seen and used. These machines use an electromagnetic circuit to move the needle grouping. There are many variations, from single-coiled machines to triple-coiled machines. They can be made from many different materials and in many different sizes and shapes. Dual-coiled machines are considered to be standard. The coils generally range from 8 to 10 wrap. The coils create the ohms,or resistance, used to properly regulate the machines speed and power. Causing less trauma to the skin.

• Liner tattoo machine: The purpose of a liner machine is to lay the ink in the skin in one single pass to create a dominant line. It uses a short contact circuit (about 1.5mm–2mm), which causes the machine to cycle faster.

• Shader tattoo machine: The shader machine is commonly used to shade black or variants of black ink. Also Color is used in this type of machine, the saturation level of this machine is low. It uses a bigger contact gap than a liner (about 2mm–3.5mm) to make it cycle slightly slower. This machine is also used for sculpting lines. Some artists will use this type of machine for all lines, as it allows the lines to be retraced with less trauma to the skin.

• Pneumatic tattoo machine: Tattoo artist Carson Hill in the year 2000 invented the first pneumatic tattoo machine and began the patent process. A pneumatic tattoo machine is powered by an air compressor, and they are extremely lightweight. Pneumatic tattoo machines use pressurized air to power the tattoo machine and drive the needles up and down. These tattoo machines are entirely autoclavable, so that the entire tattoo machine can be placed in the autoclave and sterilized fully without any major disassembly. Unlike traditional coil machines, which require complete disassembely to be placed into an autoclave.